Kitchen, bath & closet design · Somerdale, New Jersey
(856) 258-2081 Xcraftkitchen@gmail.com
Request a quote
Home

Project resources

Plan your kitchen, bath, or closet project. Start with measurements, compare cabinet options, and gather what you need for a quote.

Measure your space

Draw a simple overhead sketch and write dimensions in inches. Start at one corner and work around the room so your measurements have a consistent reference point.

  • Walls and ceiling: Record each full wall length corner to corner, then measure ceiling height. Mark soffits, columns, and other obstructions.
  • Doors and windows: Note opening widths, distance from the nearest corner, door swing, and window sill height.
  • Fixtures and appliances: Mark the sink, range, and refrigerator. Record their dimensions and centerline positions, along with visible plumbing, outlets, and vents.
See the annotated kitchen floor plan →

Compare cabinet styles and finishes

Door profile, cabinet construction, and finish are different choices. For example, a Shaker door can have an inset installation, so ask about both the profile and how the door sits against the frame.

Shaker
A simple frame surrounds a recessed center panel.
Flat panel
A smooth slab face shows off the finish or wood grain.
Inset
Doors and drawer fronts sit flush inside the cabinet face frame.

When you visit the showroom, compare a cabinet sample next to your countertop, flooring, and hardware choices. If you’re keeping an existing finish, bring a photo or sample.

Explore door styles and finishes →

Read a cabinet specification sheet

Start with the exact brand, series, and cabinet model. Construction diagrams explain what the cabinet is made of. A model’s size chart or drawing gives the dimensions you need to plan the layout.

  • Check cabinet box, door, and drawer materials separately.
  • Look for hinge and drawer-slide details, including adjustment and soft-close features where listed.
  • Confirm width, height, depth, and space for doors and drawers to open. Check appliance cutouts against the appliance manufacturer’s requirements.
Browse specification sheets by brand →

Prepare for a project quote

Share what you know so far. These details help us understand your scope and follow up on any missing measurements or selections.

  • Project ZIP code and which rooms you’re updating.
  • Photos, rough measurements, or a floor plan.
  • Cabinet series or finishes you like, plus any appliances or fixtures you’re keeping.
  • Your approximate budget and preferred timing.